spare parts for zippo lifts

Lamp Holder, Relais for control unit Zippo lift Type 1511 etc. (with contact block)

Lamp holder switch (Lamp Holder) for control unit Zippo inter...

up/down push button for control unit Zippo lift Type 1511 1521 etc.

1x Up & Down switches (Up & Down button) for control unit Zippo...

Green Glass Lights for control unit Zippo lift Type 1511 1521 etc.

1x Indicator Glass (Green Glass) for control unit Zippo inter...

Red Glass Lights for control unit Zippo lift Type 1511 1521 etc.

1x Indicator Glass (Red Glass) for control unit Zippo inter alia...

Relais, Contactor, relay for control switch Zippo lift Type 1511 1521 etc. (opener)

1x contact element (opener) for control switch Contactor -...

control box, Control unit, switchbox for Zippo lift type 1511 etc.

1x Control cabinet (control box) without electricity for various...

CHINT contactor air contactor relay relais for zippo lift type 2030 2130 2135 2140

Contactors for Zippo stage (from year 2009) 20 series depending...

Spacer, spacer sleeve, receiving increasing for lift pad Zippo Lift type 2030 2130 2135 2140 (from year 2004/2005)

Spacer for receiving plate 95 mm increase quick drop, Zippo 2030...

lifting nut + safety nut + attachments packet for Zippo Lift type 1250 1250.1 1226 1226.1 1501 1506 1526 1526.99 1532 1532AM 1511 1521

Mother packet complete (metal) angular with bearing mount for...

Pin for deformation plate leaf spring Zippo Lift 2-4 tons (Retaining pin for lifting nut)

Pin for deformation plate leaf spring Zippo Lift 2-4 tons...

Damper for Zippo lift 1521 1521.1 1250 1250.1 1226 1226.1 1501 1506 1526 1532 1532AM 1511 1730 1731 1735 (2,5mm thick)

damper, sliding pad, guide rail, sliding block, sliding component...

ribbed v-belt, flat belt, v-belt for Zippo lift type 2030 2130 2135 2140 (long version till year 2008)

1x ribbed v-belt, flat belt, v-belt, Timing Belts for Zippo lift...

Damper, sliding pad, sliding block for Zippo lift type 12/15/17 series (4.5mm thick)

Damper, sliding pad, sliding block for Zippo lift type 1521...

Damper sliding pad quan for Zippo lift type 12/15/17 series (3.5mm thick)

Damper, sliding pad, sliding block for Zippo lift type 1521...

INA Radial insert ball bearings for Zippo lift type 1211 (for lower spindle bearing)

INA Radial insert ball bearings (Sealed ball bearings on both...

upper oil tank, oil pan, spindle lubrication for Zippo lifting platform

1x Oil catch tank (Oil pan with wick) for Zippo 2 post lift -...

slide Bearing (plain bearing bush for spindle below) for Zippo Lift Model 2030 2130 2135 2140 etc. from year 2006

slide bearing (plain bearing bush for spindle below) for Zippo 2...

1 liter lifts oil for spindle, spindle oil spindle lubrication lifts scissor lift car lift

Super WMTEC care and maintenance oil oil additive for oil tank...

Roller guide roller ball bearing supporting roller for Zippo lift type 2030 2130 2135 2140

1x roller (bearing) for lateral stroke slide guide (four per side...

Condor contactor Relay Zippo Lift H 387

1x power contactor for Zippo et al type H387....

safety nut for lift type Romeico H220 / Zippo 1135 / Koni KO2M20 KN2 M20 3532/T719

1x safety nut for Romeico 2 post lift type H 220 / Koni KO2M20...

lift nut, load nut for Zippo lift type 1250.1 / 1226 / 1226.1 (trapezoidal thread 40mmx5mm)

1x lifting nut rectangular with bearing seat for Zippo 2 post...

felt package for lower oil container Zippo lift type 2130 2135 2140

1x felt package for lower oil container Zippo 2 post lift type...

cover band, spindle cover for Zippo lift type 2130 2135 2140

1x original cover tape (plastic) for Zippo 2 post lift including...

chain sprocket wheel for Zippo ZO 2/3T71 models (for 5/8 inch roller chain, metal hub)

1x Sprocket - spindle drive for 5/8 "roller chain (metal hub) for...

1x flange bearings igubal (plain bearing bush) for lower spindle bearing for Zippo 1750 lift

1x flange bearings igubal (plain bearing bush) for lower spindle...

upper oil tank spindle oiler for zippo 1511 1590 lift

Oil catch tank, (oil pan without wick) for Zippo 2 post lift i.a....

cover band, spindle cover for zippo lift type 1211 1111 1311 / ZO 2/3

1x tensioning strap (plastic) for Zippo 2-column lift including...

compression spring for Zippo lift type 1211

1x pressure spring (spring) for Zippo 2 post lift i.a. Type 1211...

INA needle roller bearing needle bearing for upper spindle bearing Zippo lift i.a. type 1211

1x needle bearing (bearing ring) for upper spindle bearing 2 post...

inner ring, bearing ring for upper spindle bearing Zippo lift i.a. type 1211

bearing ring (upper bearing ring) for 2 post lift Zippo et al...

Sealing tape insulating tape 10m long Zippo 1211 lift

Sealing tape for 2 post lift Zippo et al Type 1211 - Car Lift -...

Roller guide roller for Zippo lift type 1250 H389

1x roller (bearing) for lateral stroke slide guide (four per side...

Sheet with pressed rubber strip to the spindle cover column for Zippo Lift i.a. type 1250 1590 LS (left side)

Sheet with pressed rubber strip to cover screw - column cover -...

upper spindle bearing, radial bearing, deep groove ball bearings for Zippo Lift Model 1211

1x radial bearings, deep groove ball bearings (open bearings) for...

upper spindle bearing, Axial deep groove ball bearings for Zippo Lift Model 1211

1x thrust bearing (three-piece bearing) for upper spindle bearing...

felt pack, lubricating mat for Zippo 1226 1226.1 1250 1250.1 1236 1506 1526 1521 1532 1532.1 Lift

1x lubricating mat for Zippo oil tank 2 post lift i.a. Type 1226...

Control box, control cabinet for Zippo Lift inter alia type 1130

1x control cabinet (housing) for Zippo 2 post lift i.a. Type...

rubber strip to the spindle cover column for Zippo Lift i.a. type 1250 1590 LS (right side)

Sheet with pressed rubber strip to cover screw - column cover -...

lifting nut, load nut, spindle nut for Zippo 1930 Lift

1x load nut (lift nut) for Zippo 2 post lift inter alia type 1930...

Zippo arm lock locking arm locking 1730 1731 1735

1x support arm completely for Zippo 1730 1731 1735 models (lock...

Original Wire rope for Zippo 2405 lifting platform

1x original cable wheel (with radial bearing + pin) for steel...

original cable pulley for Zippo 2405 Lifting Platform (for two steel ropes)

1x original cable pulley (with radial bearing) for two steel...

Lafert rectifier relays STD-1 Relay switches Rectifier Relay Zippo

1x Original Lafert Brake rectifier (Rectifier) Plastic housing...

original lifting nut for zippo 6 tons lift type 2150 2160 / 2.60-2M

1x Original load nut with groove for seawall for Zippo 2 column...

motor for Zippo 1735 Lift

1x drive (for spindle opposite side + operating side) control...

shift cable, control cable, safety cable for Zippo Lift 610170

1x Shifter cable (safety cable long) for Zippo 2 column stage and...

Bolt Shaft for control cable Steel cable Deflection pulley Wheel Roller Zippo 1526 1226.1 Lift

1x threaded shaft (pin 15.25.345) for deflection pulley 12mm...