spare parts for zippo lifts

toothed flat belt for Zippo lift type 1150 1226 1226.1 1250 1501 1506 1511 1521 1526 1531 1532

1x Optibelt Omega Timing belts (V-belt) attention: upper motor...

original potentiometer, poti, relay for zippo lift type 1730 1731 1735 1751 (short cable 60cm length)

1x Original potentiometer (short cable length 60cm) plastic /...

control switch, up/down switch for Zippo lift Type 1250

1x selector switch W111/128A for plastic control box (up / down...

up/down switch, reversing switch, control switch for Zippo lift Type 1226 1526 1236

1x phase converter for plastic control box (up / down switch)...

up/down switch, control switch for zippo lift Type 1250 (for metal box or switchbox)

control switch for metal box or switchbox Zippo lifting platform...

lifting nut and safety nut Set for Zippo lift type ZO Ford, ZO 2-3 T, ZO 2VW, ZO 2TE, ZO 2/T03, ZO 2/1, 2, 3, 4, 5, 6, ZO 3

1x Set of supporting nut (lifting nut) + safety nut (locking nut)...

load nut lifting nut for Zippo lift Type 1250 1250.1 1226 1226.1 1232 1236 1501 1506 1526 1526.99 1532 1532AM 1511 1521

load nut, lift nut, Supporting nut, main nut (lift nut) angular...

lift nut or safety nut for Zippo lift Type 1001 1101 1301 1305 1311 1111 1201 1211 ZO2 ZO 2-3 T71 with buttress thread

Lifting nut or safety nut for Zippo lift rectangular with...

up/down switch, control switch for Zippo lift Type 1226 1526 1236

1x Motor reversing switch, up/down switch, reversing switch, main...

Phase converter, control switch for Zippo lift Type 1250 1226 1526 1232 1236

1x selector switch or phase converter (up & down switch) for...

lifting nut + damper for Zippo lift Type 2030 2130 2135 2140

1x Original Lifting nut (new design + damping) for 2 post lift...

lifting nut for Zippo lift (45mm x 5mm) type 1111 1210 1112 1211 1271 1301 1304 1311 1312 1511 1515 1521 1531

Lifting nut, load nut (without turning device for bearing seat)...

original lifting nut (new version) for Zippo lift type 2030 2130 2135 2140 2040 from construction year 2005

1x original Lifting nut or safety nut (new design) for Zippo lift...

up/down switch, control switch, reversing switch for Zippo lifting platform

control switch (up & down switch) for Zippo lifting platform....

up/down switch, control switch, reversing switch for Zippo 2 post lift

control switch (up & down switch) for Zippo lifting platform....

original lifting nut + safety nut in Set for Zippo lift Type 1750

1x original Lifting nut + safety nut in the package for Zippo...

toothed flat belt, drive belt, v-belt for zippo lift 1226 1226.1 1250 1506 1511 1521 1526 1531 1532

drive belt, poly-belt, toothed belt, flat belt, v-belt for 2 post...

toothed flat belt, drive belt, toothed belt, v-belt for zippo lift Type 1501 (width 40mm)

drive belt, poly-belt, toothed belt, flat belt, v-belt for 2 post...

Original toothed flat belt for Zippo Lift 1250 1250.1 1226 1226.1 1501 1506 1511 1511.1 1520 1521 1526 1531 1532

1x Original toothed belt for lower base frame for 2 post lift...

original toothed flat belt for Zippo lift type 1250.1 VS

1x Original toothed flat belt (V-belt) for wide base frame...

ribbed v-belt, flat belt for Zippo lift Type 1730 1731 1735

1x original toothed flat belt (manufacturer Good Year/Optibelt)...

original toothed flat belt, ribbed v-belt for Zippo lift Type 1730 1731 1735

Original timing belts (V-belt) / 2 post lift Zippo Type 1730 1731...

isolator swith, control switch for Zippo 2 post lift Type 12er 15 Serie 1590

1x isolator switch Zippo and others type 12 15 series 1590....

up/down switch, reversing switch, main switch, cam switch, control switch for Zippo lift type 1750

main switch (up & down switch) for Zippo lifting platform type...

Rotary selector switch, main switch, isolator switch for Zippo lift Type 1730 1731 1735

main switch (Rotary selector switch) for Zippo lifting platform...

Main reversing switch main switch isolator switch Zippo 12 15 series 1511 1521

1x main switch (isolator switch) Zippo including type 12 / 15...

XPZ v-belt, drive belt for Zippo lift (XPZ DIN 7753) (lifts with two spindles)

(XPZ DIN 7753) v-belt, drive belt, toothed belt, for 2 post lift...

ribbed v-belt, v-belt, drive belt, flat belt for Zippo lift Type 1750 (5 tons)

ribbed v-belt, v-belt, drive belt, poly-belt, toothed belt, flat...

ribbed v-belt, v-belt, drive belt, flat belt for Zippo lift Type 2030 2130 2135 2140 (short version from year 2006)

1x timing belt from 2006 (manufacturer Good Year) for 2 pillar...

lift nut or load nut for Zippo lift type 1590/1590 LS (rectangular with bearing mount) 5 tons

Lifting nut, load nut or lift nut (rectangular with bearing...

lifting nut or safety nut for zippo lift Type 1150 1930 / DR 2000

Lifting nut or safety nut (plastic) for 2 post lift Zippo type...

original potentiometer, poti, relais for Zippo lift Type 1730 1731 1735 1751 (900 cm cable length, plastic)

potentiometer, poti, potis (900 cm cable length, plastic) for...

original potentiometer, poti, potis, Relais, Regulator (long cable plastic) for 2 post lift Zippo

1x Original potentiometer, poti, Relais, Regulator (long cable...

1x ball bearing (2x bearing shell) for lower spindle bearing Zippo lift 1226 1226.1 1250 1250.1 1506 1511 1521 1526 1532 1590 LS

1x ball bearing (2x bearing shell) for lower spindle bearing 1...

flange bearing for lower spindle bearing zippo lift type 1730 1731 1735

Plain bearing flange IGUBAL (bearing flange) for lower spindle...

1x ball-bearings + flange bearing for upper spindle bearing Zippo lift 1226 1226.1 1250 1501 1506 1511 1521 1526 1531 1532

1x ball bearing + bearing flange respectively four-point contact...

lift pad, rubber pad for Zippo lift (152mm x 17mm with steel insert) ZO 2/3

1x support plate for Zippo 2-post lift, including type 1211 -...

lift pad, rubber pad for Zippo 1511 lift 4/Typ CE-300/Ebing (150mm x 30mm)

Rubber pad for Zippo 1511 - 2 post lift - Platforms - Car Stage....

lift pad, rubber plate for Zippo 1250 1221.1 1226.1 1590 1236 1532 1226 1511 1521 1526 1690 1626 lift (120mm x 15mm 3 holes with steel insert)

1x rubber pad for Zippo 2 post lift including type 1250 1221.1...

lift pad, rubber pad for Zippo lift (103mm x 15mm + 3 holes with steel insert)

Rubber pad for Zippo 2 post lift - Platforms - Car Stage....

lift pad, rubber plate, rubber pad for Zippo lift type 1250 / 1526.1 (120mm x15mm with 4 holes)

Rubber pad for Zippo inter alia type 1250 / 1526.1 / 2 post lift...

lift pad, rubber plate for Zippo lift Type 1311 1313 (126mm x 22mm with steel insert + 1 center hole)

Rubber pad for Zippo 2 post lift - Platforms - Car Stage inter...

receiving increasing + rubber recording for Zippo lift type H 387 / 2135 / 17 series (134mm x 17mm with steel insert)

1x receiving increasing + rubber recording for Zippo lift type H...

lift pad, rubber pad, rubber plate for Zippo lift (120mm x 16mm with steel insert + 3 holes)

1x rubber pad for Zippo 2 post lift including type 1150 1236 1226...

receiving increasing + rubber recording for Zippo lift Type 2135 / (140mm x 22mm with replaceable rubber pad + round slip-on)

receiving increasing + rubber recording for Zippo lift type 2135...

Limit switch for Zippo lift type 1271 1501 1506 1250 1521 1590 (upper column drive side or opposite side)

1x safety switch Bernstein with roller for Zippo 2 post lift etc....

Limit switch for Zippo lift type 1501 1506 1250 1521 1590 (installed upper limit on the drive side) Z.No. 61.15.345

1x Pizzato limit switch, button, safety switch, position switch...

Limit switch with pestle and cable for Zippo 2 post lift

Bernstein safety switch with pestle and cable for Zippo 2 post...

Bernstein Limit switch (with roller and cable) for Zippo lift type 8002

Bernstein Safety switch with roller lever and cable / Zippo...

Bernstein Limit switch with tappet for Zippo lift type 1526 1250 1590

Bernstein Micro switch with plunger for Zippo 2 post lift, inter...

Bernstein Limit switch (with cable and roller) for Zippo 2 post lift

Bernstein Safety switch with cable and roller lever / Zippo 2...

Limit switch, micro switch for zippo lift (with tappet)

Bernstein Switch contact with plunger for Zippo 2 post lift /...

Bernstein switch contact, regulator switch, Limit switch for Zippo lift type 1526 1226.1 1250 1590 (with tappet)

1x Bernstein limit switch, switch contact, button, safety switch,...

Bernstein Limit switch with tappet Zippo lift type 2305 2405

1x switching contact with tappet Bernstein for Zippo 4 post lift...

Bernstein Limit switch with tappet for Zippo lift Type 1250 1501 1506 1521 8091 EF 8090 (lower limit switches installed at the top of column)

1x Bernstein Switch contact with plunger / Zippo 2 post lift,...

Bernstein limit switch, button, safety switch, position switch (with tappet) for Zippo lift type 1226 (Installed centrally opposite side) 1590 A-side synchronization control installed 2x

1x proximity switch with plunger Bernstein for Zippo 2 post lift...

Bernstein Knee lever, roller, roller lever for limit switch Zippo lift Type 1506 (upper limit for operating side and the opposite side)

1x BernsteinKnee lever, roller, roller lever for Zippo lift Type...

Bernstein roller, roller lever for Zippo lifting platform

Roller Bernstein / Zippo 2 post lift / Platform - Car Stage....

Approach roller Bernstein Knee lever, roller, roller lever for limit switch Zippo lifting platform

1x approach roller for button or roller Bernstein for Zippo 2...

Safety nut for zippo lift type 1211 1250 1506 1511 1301 1271 1531 1515 etc. 45x5x80mm

Safety nut (spindle nut) rectangular for 2 post lift Zippo type...

Safety nut for Zippo lift type 1111 1112 1211 1271 1301 1304 1311 1312 1515 1531 45x5x30

safety nut for 2 post lift Zippo - automotive stage....

Safety nut for zippo lift type 1250 1250.1 1226 1226.1 1236 1521 1526 1501 1506 1511 1532 1532 AM 1211 1311 1111 1312 1271

Safety nut, locking nut for 2 post lift Zippo Type 1250, 1250.1,...

original safety nut for Zippo lift Type 1730 1731 1735

1x original safety nut (lift nut and safety nut are identical)...

Safety nut with buttress thread for zippo lift type 1001 1101 1111 1201 1301 1211 1311 ZO 2-3 T71

Safety nut (buttress thread) for 2 post lift Zippo Typ 1001 1101...

Safety nut for Zippo lift Type 1590 1590 LS 5 tons 45x5x120mm

Safety nut for 2 post lift Zippo Type 1590 1590LS (5 tons lift) -...

original safety nut (new version) for Zippo Lift type 2030 2130 2135 2140 2040 from construction year 2005

original safety nut or lifting nut (new version) for Zippo Lift...

safety nut for zippo lift type 1226.1 1250.1 1526.1 1532.1 1532 AM

Safety nut, locking nut for Zippo lifting platform Type 1226.1...

original safety nut + distance disc for Zippo Lift type 2030 2130 2135 2140 2040 (new version from year 2005)

1 x Originale Sicherheitsmutter bzw. Tragmutter + Distanzscheibe...

control switch, reversing switch, up/down switch for Zippo lift Type 1130 2030 2130 2135 2140 etc. (with cable pull and bottom attachment)

up/down switch (reversing switch) with cable pull and bottom...

original belt pulley for motor drive Zippo lift Type 1226 1226.1 1250 1250.1 1501 1506 1512 1511 1521 1526 1531 1532 1532AM

1x original aluminum pulley for upper motor drive / 2 post lift...

original v-belt pulley for Zippo lift (one motors) type 1501 1506 1226 1250 1511

1x original aluminum v-belt pulley, toothed pulley for drive belt...

1x Original Poti Holder incl. Plastic Timing Belt Pulley V-belt Pulley for Zippo Lift Type 1730 1731 1735 1750 1751

1x Original Poti-Holder incl. Plastic Belt Disc for Timing Belt &...

original belt disc, toothed belt pulley, drive belt (plastic) for Zippo lift Type 1730 1731 1735 and car Lift

1x original plastic toothed belt pulley for 2 post lift Zippo...

original toothed belt pulley for zippo lift Type 1512 1526 1250 1532 1226

1x Original pulley large (belt pulley) for timing belt / Zippo 2...

original metal v-belt pulley, toothed pulley for zippo lift 1731 1730 1735

1x Original metal belt pulley for timing belt / Zippo 2 post lift...

original v-belt pulley for zippo lift Type 2301 2305 2405 2320 2420 car Lifts

1x original cable pulley (xb single pulley) for a control cable...

original v-belt pulley for zippo lift Type 2405 car Lifts (with radial bearing)

Original V-belt pulley (with radial bearings) for V-belts / 4...

Original pulley pulley pulley drive wheel suitable Zippo lifting platform type 2301 2305 2405 2420 2320 Autolift

1x original double pulley for two steel cables / Zippo 4 post...

original v-belt pulley, double pulley for Zippo car Lifts Type 2105

Original V-belt pulley (double pulley) for V-belts / Zippo 2 post...

1 pair shock absorption protection, damper for lift nut or safety nut Zippo lift Type 2030 2130 2135 2140

1 pair of dampers (noise reduction) for lifting nut and safety...

pressure disc, backup ring, distance disc for zippo lift Type 2030 2130 2135 2140 (from construction year 2005 installed)

Plastic spacer or support ring for Zippo lifts (built around...

disc, metal ring, spacer disc for spindle nut zippo lift Type 2030 2130 2135 2140

disc, metal ring, spacer disc for spindle nut 2 post lift Zippo...

disc, metal ring, spacer disc for lift nut and safety nut zippo lift Type 2030 2130 2135 2140

disc, metal ring, spacer disc for lifting nut and safety nut / 2...

circlip, lock ring, protection ring for lift nut and safety nut for zippo lift Type 2030 2130 2135 2140

circlip, lock ring, protection ring for lift nut and safety nut...

Safety nut for zippo lift type 1930 from construction year 2009

Safety nut, locking nut for Zippo lifting platform Type 1930 from...

lifting nut, load nut for zippo lift type 1930 from construction year 2009

1x spindle nut, lift nut or load nut for Zippo lifting platform...

control board, PC board, controller SGMX 10 KW for Bosch / zippo lift Type H331.1 H383 H387 2030 2130 2135 2140

1x PC board Bosch / Zippo etc. Type H331.1 H387 2030 2130 2135...

control board, PC board, controller for zippo lift type 2030 2130 2135 2140

control board, PC board, controller for 2 post lift Zippo Type...

chain sprocket wheel for zippo lift Type 1001 1101 1201 1211 1250 1501 1506 1511 and ZO 2 models (for 5/8 inch roller chain)

1x pinion - sprocket - spindle drive (attention: 17 teeth) for...

chain sprocket wheel for Zippo lift Type 1211 1111

chain sprocket wheel (plastic) for zippo lift Type 1211 1111....

chain sprocket wheel for Zippo lift Type 1411 (plastic)

1x chain sprocket wheel (plastic) for zippo lift Type 1411....

chain sprocket wheel for Zippo lift Type 1211 1111 (Plastic with socket)

chain sprocket wheel (plastic with socket) for zippo lift Type...

Multi-turn potentiometer, Relais, Regulator for Zippo lift type 1130 1301

1x multi-turn potentiometer (without cable and pinion) / for...

original sliding pad, guide rail, sliding block for Zippo lift Type 1730 1731 1735 1750

1x original sliding pad, guide rail, sliding block, sliding...

roller chain, drive chain for Zippo 1211 1511 Lift 5/8" inch (including chain lock)

roller chain, drive chain for inter alia Zippo 1211 1511 Lift -...

locking plate, safety plate for lift nut or safety nut Zippo lift Type ZOFord ZO 2-3 T, ZO2VW, ZO2/T03, ZO 2/1 2 3 4 5 6, ZO 3

1x Safety Edge for lifting nut or safety nut. The rail is...

Def Roller Def. Element for control cable zippo lift type 1250 1511 1512 VAG1657 VAG1443

1x deflection segment (plastic), Def. Element for control cable 2...

deflection segment for control cable zippo lift type 1501 (for G-side down on the chain case)

Def element -. Deflection segment (plastic) for G-side down on...

deflection roller for control cable, control cable guide for Zippo lift type 1526 1506 1511 1250 1532 1232

Pulley for rope holder - bottom base plate -. Def element Roller...

flange bearing, ball-bearing for upper spindle bearing Zippo lift 1150 1250 1232 1226 1226.1 1501 1506 1511 1520 1521 1526 1532 1730 1731 1735

Flange Bearing (ball bearing sealed on both sides) for upper...

cable holder, control cable guide for Zippo lifting platform type 1250 1506 1511 1526 1532

1x Rope holder with caster LN -. Def element Roller - deflection...

deflection roller for control cable, control cable guide for Zippo lift type 1526 / 1226.1

1x Deflection pulley - gallows right left -. Def element Roller -...

cable pulley, deflection roller for contral cable 2 post lift Zippo type inter alia 1526 1232

1x cable pulley Deflection roller 60/50 - top motor - Def element...

sliding pad, sliding block for Zippo lift type 1730 1731 1735

sliding pad, guide rail, sliding block, sliding component for 2...

maintenance Spray, lubricant, maintenance oil, oil for lifts of all kinds

Care and maintenance oil for 2 post lift - Scissor Lift - Scissor...

leaf spring for sprocket wheel for Zippo lift type 1211 1111 ZO2

Leaf spring for gear - sprocket (metal spring) for Zippo 2 post...

original cable clip, cable holder for zippo lift Type 1730 1731 1735 1750

1x Original Mounting Clip for potentiometer cable (plastic clip)...

top roller, back-up roll for Zippo lift 1211 1201 1001 1101 1111 1301 1311 1312 and Z02 models

1x support roller (ball bearing sealed on both sides) for lifting...

Motor electric motor drive (for spindle opposite side + operating side) Zippo lifting platform Type 1730 1731

Drive (for spindle opposite side + operating side ) control Type...

concave ring, lift nut ring for 2 post lift Zippo Type 1730 1731 1735

Concave Ring (lifting nut ring) 1 piece per side installed / 2...

original shift cable, control cable, steel cable for Zippo lift Type 1250, 1226, 1226.1 (12 series) (safety cable short)

1x Original shift cable (security cable short) for Zippo inter...

original shift cable, control cable for Zippo lift Type 1506 1511 1521 1532 (15-series) (safety cable long)

Original shift cable (security cable long) for Zippo inter alia...

original shift cable, control cable for Zippo lift Type 1590 / 1590 LS (safety cable long)

1x switching cable (safety cable 17m long) for Zippo 2 post stage...

control cable for Zippo lifting platform (safety cable long)

Shift cable (security cable long) for Zippo 2 post lift -...

shift cable, control cable for 2 post lift Zippo Type 1511

Shift cable (safety cable) for Zippo 2 post lift type inter alia...

radial bearings, ball Bearing for Zippo 1250 1226 1511 1521 1526 1590 1532 lift (for lower spindle bearing)

1x deep groove ball bearing (ball bearing sealed on both sides)...

radial bearing (ball-bearing sealed on both sides) for upper spindle bearing Zippo lift type 1730 1731 1735

Deep groove ball bearings (ball bearings sealed on both sides old...

Bearing ring for lower spindle bearing zippo 2 post lift Type 1001

1x inner ring (bearing ring) for the lower spindle bearing 1...

radial bearings (1x ball-bearings sealed on both sides) for upper spindle bearing Zippo lift type 1590 1590 LS

Deep groove ball bearings (ball bearings sealed on both sides old...

Glide ring. DU bearing for spindle bearing Zippo lift

DU-bearing (bearing-ring) for spindle positioning 1 per page...

needle bearing ring for spindle bearing Zippo lift Type 1001

Needle bearing (bearing ring) for spindle bearings / 2 post lift...

radial bearing (ball-bearing open at both ends) for upper spindle bearing for Zippo lift

Deep groove ball bearings (ball bearings on both sides open) for...

convex ring, concave ring, lift nut ring for load nut zippo lift Type 1730 1731 1735

Convex ring (lifting nut ring) 1 piece per side installed / 2...

deep groove ball thrust bearing for upper spindle bearing Zippo lift type 1730 1731 1735

Thrust ball bearings (Axial deep groove ball bearings) for upper...

deep groove ball thrust bearing for upper spindle bearing Zippo lift type 1590 LS / 1590

Axial deep groove ball bearing, head bearing (top bearing) for...

Moeller contact block contact element control switch contactor Zippo vehicle stage 1511 1521

1Contact element (E K01) for control switch in the control box...

contact block, contact element for control switch Zippo lift Type 2405 2305 (closers)

contact element (closers) for control switch in control box...

contactor, contact block, contact element for control switch Zippo lift Type 2405 2305 (opener)

contact element (opener) for control switch in control box...

maintenance Spray, lubricant, fat for lifts of all kinds

Super Long Time grease spray with oil care and maintenance oil...

up/down switch, reversing switch, control switch for Zippo lift type 1250 1526

Motor reversing switch for plastic control box (up / down switch)...

damper for Zippo lift 1521 1521.1 1250 1250.1 1226 1226.1 1501 1506 1526 1532 1532AM 1511 1730 1731 1735 (4.5mm thick)

damper, sliding pad, guide rail, sliding block, sliding component...

damper, sliding pad, sliding block Zippo lift Type 12/15/17 series (4.5mm thick)

damper, sliding pad, guide rail, sliding block, sliding component...

lifting nut cage for Zippo 2 post lift Type 1511 1521 1521.1

1x Lifting nut cage / 2 post lift Zippo among inter alia Type...

toothed belt, ribbed v-belt for Zippo lift Type 1501 (width 35mm)

drive belt, poly-belt, toothed belt, flat belt, v-belt for 2 post...

felt for oil tanks Zippo lift type 1730 1731 1735 1750

1x Felt packaging for vats (new version) consisting of 1 Felt...

Bernstein limit switch for Zippo lift type 1250 1501 1506 1521 1590 (installed in the upper column drive side, upper limit switch)

Bernstein limit switch, button, safety switch, position switch...

Chain tensioner, chain guide for roller chain zippo lift type 1511 1211

1x Chain tensioners for roller chain (Chain Tension) / Zippo 2...

cover band, spindle cover for zippo lift Type 1111 1211

1x Masking tape (plastic) for Zippo 2 post lift, inter alia, Type...

Power Point 16A Schuko socket for zippo lift type 1730 1731 1735 2030 2130 2135 2140

Mennekes socket with hinged cover, inter alia, for Zippo Type...

maintenance fat, lubricant, fat for lifts of all kinds

Super Long Time Grease for 2 post lift - Scissor Lift - Scissor...

Lifting nut + safety nut + Locking plates for Zippo lift type 1401 1411 / 4 tons lift

Lifting nut (sawtooth mother) + safety nut + Locking plates for...

lifting nut, load nut for Zippo lift type ZO / 1511 trapezoidal thread Ø45x6mm, Dimensions 60x60x80mm

Lifting nut angular version without bearing support for Zippo...

up/down switch, reversing switch, control switch for Zippo lift type ZSB 77 / 1250

control switch (up/down switch) for Zippo lifting platform inter...

toothed flat belt, drive belt for Zippo lift 1250 1250.1 1226 1226.1 1501 1506 1511 1520 1521 1526 1531 1532

ribbed toothed belt, flat belt, v-belt for 2 post lift Zippo with...

flange bearing + four point bearing for upper spindle bearing Zippo lift Type 1730 1731 1735 1750 and 12/15 series

1x ball bearings or flanged + four-point contact ball bearings...

spring, pressure spring for Zippo lift Type 1250

spring, compression spring, pressure spring for 2 post lift Zippo...

Cable Holder, spring for zippo lift Type 1250

Cable Holder, spring, pressure spring for 2 post lift Zippo Typ...

Door stop for Zippo lift Type 1130 2130

Door stop bar / Zippo 2 post lift, inter alia, Type 1130 2130 /...

v-belt spray, maintenance Spray for lifts of all kinds

Super drive belt and v-belt spray with maintenance oil for 2 post...

INA needle bearing for upper spindle bearing Zippo lift type 1001 1211

1x needle bearing (bearing ring) for upper spindle bearing 2 post...

lift pad, rubber pad, rubber plate for Zippo 1730 1731 1735 1750 lift (127mm x 22mm with steel insert + 1 hole)

1x mounting plate for Zippo 2 post lift, etc. Type 1730 1731 1735...

original BTR Time Relay Coil for Solenoid for 2 post lift Zippo Type 2405

1x Original Time Relay (coil for solenoid) plastic housing / for...

damper for lift nut or load nut for zippo 2 post lift Type 2030 2130 2135 2140 (new version from construction year 2005)

1x damper + clamp (new version) for Zippo 2 post lift, inter...

SPZ v-belt, drive belt for lift Type 1130 (two spindle motors)

SPZ DIN 7753 / 1x V-belts) / 2 post lift Zippo (two spindle...

opener ABB contactor, air contactor, relay for zippo lift type 1730 1731 1735

ABB Contactor (Contactor) Zippo models Warning: Year depends,...

Double control panel button for zippo lift type 1730 1731 1735 (Control button sheet + double pushbutton)

1x original control panel (up and down switch) control buttons...

double button, push button, up/down button for zippo lift type 1730 1731 1735 / 1425

1x double pushbutton with RMQ titanium mounting adapter or switch...

contactor, contact block, contact element, relais for zippo lift type 1730 1731 1735 (opener)

contact element (opener) for control switch Contactor - Normally...

Control Box, PCB Retro Kit for Zippo lift type 1730 1731 1735 etc

Control cabinet (Control Box PCB Retro Kit) without electronics...

1 pair Arm Lock, locking device, adjustment for zippo lift (complete)

1 pair of arm locks completely for Zippo models depending Year...

Toe Guard Alarm, sensor for control box Zippo lifting platform

1x signal generator for control box / Zippo 2 post lift /...

Toe Guard Alarm, sensor for control box Zippo lifting platform

1x signal generator for control box / Zippo 2 post lift /...

Lifting nut (sawtooth mother) for Zippo lift Type 1111 1211 1401 1411 / 4 tons

Lifting nut (sawtooth mother) angular for Zippo lift type 1211...

connection plate for lifting nut zippo lift Type 1001 1111 1211 1401 1411 / 2-4 tons (wear plate between lift nut and safety nut)

wear plate between lift nut and safety nut (Sägezahnmutter or TR)...

sheet metal, plate for lifting nut zippo lift Type 1111 1401 1411 / 4 tons lift

Drive plate for lifting nut main nut (Sägezahnmutter) Rectangular...

retaining plate, plate for lift nut or load nut zippo 2 post lift Type 1111 1401 1411 / 4 tons lift

retaining plate for lifting nut or main nut (Sägezahnmutter)...

Lifting nut or safety nut for zippo lift Type 1150 (plastic)

Lifting nut or safety nut for Zippo lift type 1150 (plastic) -...

Chain tensioner for zippo lift Type 1511 1211

1x Rubber attachment for chain tensioner (Chain Tension) for...

Door stop, edge protection for Zippo 2 post lift

Door stop bar / Zippo 2 post lift / Platform - Car Stage....

up/down push button for Zippo 2 post lift Type 15 Series/models

switch with switching contact (up or down) Zippo 2 post lift,...

up/down push button for zippo lift Type 1521 1511

1x pressure switch without switching contact (raising or...

Plastic guide block, slide block, sliding pad for 2 post lift Zippo Type 1232 1250.1 and 12/15 Series

1x Sliding block sliding wedge (anti-slip) / Zippo 2 post lift...

Plastic guide block, sliding pad for zippo lift Type 1511 / 12/15 Series

Sliding block sliding wedge (anti-slip) / Zippo 2 post lift type...

safety catch roller, deflection pulley for Zippo lift Type 1526 1511 1250 1532 2205 2305 2405

1x Pulley for rope holder - Def element Roller -. Deflection...

safety catch roller for Zippo lift Type 1526 1511 1250 1532

Pulley for rope holder - Def element Roller -. Deflection segment...

cover band, spindle cover for zippo lift Type 1111 1211

Cover band, spindle cover for zippo lifting platform type inter...

cover band, spindle cover for zippo lift Type 1411 1401

1x Strap (plastic) for Zippo 2 post lift, inter alia, Type 1411...

chain sprocket wheel for Zippo lift Type 1211 1111 (with inner ring and plastic socket)

chain sprocket wheel (with inner ring and plastic socket) for...

IR inner ring, LR bearing ring for chain sprocket wheel Zippo 2 post lift Type 1211 1111

LR bearing ring (bearing ring) for chain sprocket wheel 2 post...

plastic ring, bearing ring, DU-bearing for chain sprocket wheel Zippo lift Type 1211 / 1111

Plastic bushing (bearing ring) for chain sprocket wheel 2 post...

Lifting nut, load nut for Zippo lift Type 1226.1 1532AM 1250.1 1532.1 1526.1

1x load-bearing nut main nut (plastic) square with bearing holder...

lifting nut bar, rubber damper, sliding pad-quan for Zippo lift 1250 1250.1 1226 1226.1 1501 1506 1526 1532 1532AM 1511 1521

Lifting nut bar (damper) slide spacers for Zippo 2 post lift,...

rubber pad for receiving increasing Zippo lift Type 2135 2130 2030 2140 (140mm x 22mm, Internal dimensions 134mm plate)

rubber pad for receiving increasing for Zippo 2 post lift type...

up/down switch (with cable) for Zippo lift Type 2030 2130 2135 2140 1130

up/down switch (reversing switch) with cable pull and bottom...

potentiometer, poti (short cable, length 60cm, plastic) for Zippo Inground lift Type 9251

1x Original potentiometer (short cable length 60cm) plastic / for...

Safety nut (Sawtooth mother) for Zippo Type 1211 1111 1401 1411 / 4 tons lift

safety nut angular for Zippo lift 4 tons capacity type 1111 1211...

deformation of sheet metal for lifting nut Zippo lift Type 1401 1411 2-4 tons (Wear plate between lifting nut and safety nut nut)

Wear plate between lift nut and safety nut (Sägezahnmutter) Zippo...

gearwheel, v-belt pulley for Zippo lift Type 1150 1226 1226.1 1250 1250.1 1501 1506 1511 1521 1526 1531 1532 1532 AM

gearwheel (steel) for motor drive / 2 post lift Zippo inter alia...

Deformation plate, leaf spring, connection plate for lifting nut Zippo lift 2-4 tons (right plate)

Deformation plate, leaf spring, wear plate, connection plate for...

Deformation plate, connection plate for lifting nut Zippo lift 2-4 tons (left plate)

Deformation plate, leaf spring, wear plate, connection plate for...

Cable Hook for control cable Zippo 2 post lift 2-4 tons

Cable Hook for control cable Zippo lift 2-4 tons....

toothed belt holder for Zippo 2 post lift type 1730 1731 1735

Original timing belt attachment (Rod Holder) for 2 post lift...

contactor, air contactor, relay for Zippo lift Type 1211 1226 1511 1250 also 4 post lift

Telemecanique contactor for Zippo lifting platform Type 1211/...

cam switch, main switch, Rotary switch, isolator switch for Zippo lift Type 1511

isolator switch (Rotary switch) for Zippo lifting platform inter...

T-handle, swivel handle for main switch for Zippo lift Type 1511

1x padlock lock for disconnectors (flush mounting cam switch)...

receiving increasing + rubber pad for Zippo lift (135mm x 17mm with steel plate + round plug-on)

receiving increasing + rubber recording for Zippo 2 post lift -...

rope limit, safety cable, control cable, shift cable for Zippo lift E/Type (with plates and springs) (drive-site)

Cable circuit completely (safety rope A side) for Zippo stage...

Up/Down Push Button for control unit Zippo lift Type 1511 etc. (with contact block)

1x Up & Down switches (Up & Down button) for control unit Zippo...

Lamp Holder, Relais for control unit Zippo lift Type 1511 etc. (with contact block)

Lamp holder switch (Lamp Holder) for control unit Zippo inter...

Lamp Holder, Relais for control unit Zippo lift Type 1511 etc. (with contact block)

Lamp holder switch (Lamp Holder) for control unit Zippo inter...

up/down push button for control unit Zippo lift Type 1511 1521 etc.

1x Up & Down switches (Up & Down button) for control unit Zippo...

Green Glass Lights for control unit Zippo lift Type 1511 1521 etc.

1x Indicator Glass (Green Glass) for control unit Zippo inter...

Red Glass Lights for control unit Zippo lift Type 1511 1521 etc.

1x Indicator Glass (Red Glass) for control unit Zippo inter alia...

Relais, Contactor, relay for control switch Zippo lift Type 1511 1521 etc. (opener)

1x contact element (opener) for control switch Contactor -...

control box, Control unit, switchbox for Zippo lift type 1511 etc.

1x Control cabinet (control box) without electricity for various...

CHINT contactor air contactor relay relais for zippo lift type 2030 2130 2135 2140

Contactors for Zippo stage (from year 2009) 20 series depending...

Spacer, spacer sleeve, receiving increasing for lift pad Zippo Lift type 2030 2130 2135 2140 (from year 2004/2005)

Spacer for receiving plate 95 mm increase quick drop, Zippo 2030...

lifting nut + safety nut + attachments packet for Zippo Lift type 1250 1250.1 1226 1226.1 1501 1506 1526 1526.99 1532 1532AM 1511 1521

Mother packet complete (metal) angular with bearing mount for...

Pin for deformation plate leaf spring Zippo Lift 2-4 tons (Retaining pin for lifting nut)

Pin for deformation plate leaf spring Zippo Lift 2-4 tons...

Damper for Zippo lift 1521 1521.1 1250 1250.1 1226 1226.1 1501 1506 1526 1532 1532AM 1511 1730 1731 1735 (2,5mm thick)

damper, sliding pad, guide rail, sliding block, sliding component...

ribbed v-belt, flat belt, v-belt for Zippo lift type 2030 2130 2135 2140 (long version till year 2008)

1x ribbed v-belt, flat belt, v-belt, Timing Belts for Zippo lift...

Damper, sliding pad, sliding block for Zippo lift type 12/15/17 series (4.5mm thick)

Damper, sliding pad, sliding block for Zippo lift type 1521...

Damper sliding pad quan for Zippo lift type 12/15/17 series (3.5mm thick)

Damper, sliding pad, sliding block for Zippo lift type 1521...

INA Radial insert ball bearings for Zippo lift type 1211 (for lower spindle bearing)

INA Radial insert ball bearings (Sealed ball bearings on both...

upper oil tank, oil pan, spindle lubrication for Zippo lifting platform

1x Oil catch tank (Oil pan with wick) for Zippo 2 post lift -...

slide Bearing (plain bearing bush for spindle below) for Zippo Lift Model 2030 2130 2135 2140 etc. from year 2006

slide bearing (plain bearing bush for spindle below) for Zippo 2...

1 liter lifts oil for spindle, spindle oil spindle lubrication lifts scissor lift car lift

Super WMTEC care and maintenance oil oil additive for oil tank...

Roller guide roller ball bearing supporting roller for Zippo lift type 2030 2130 2135 2140

1x roller (bearing) for lateral stroke slide guide (four per side...

Condor contactor Relay Zippo Lift H 387

1x power contactor for Zippo et al type H387....

safety nut for lift type Romeico H220 / Zippo 1135 / Koni KO2M20 KN2 M20 3532/T719

1x safety nut for Romeico 2 post lift type H 220 / Koni KO2M20...

lift nut, load nut for Zippo lift type 1250.1 / 1226 / 1226.1 (trapezoidal thread 40mmx5mm)

1x lifting nut rectangular with bearing seat for Zippo 2 post...

felt package for lower oil container Zippo lift type 2130 2135 2140

1x felt package for lower oil container Zippo 2 post lift type...

cover band, spindle cover for Zippo lift type 2130 2135 2140

1x original cover tape (plastic) for Zippo 2 post lift including...

chain sprocket wheel for Zippo ZO 2/3T71 models (for 5/8 inch roller chain, metal hub)

1x Sprocket - spindle drive for 5/8 "roller chain (metal hub) for...

1x flange bearings igubal (plain bearing bush) for lower spindle bearing for Zippo 1750 lift

1x flange bearings igubal (plain bearing bush) for lower spindle...

upper oil tank spindle oiler for zippo 1511 1590 lift

Oil catch tank, (oil pan without wick) for Zippo 2 post lift i.a....

cover band, spindle cover for zippo lift type 1211 1111 1311 / ZO 2/3

1x tensioning strap (plastic) for Zippo 2-column lift including...

compression spring for Zippo lift type 1211

1x pressure spring (spring) for Zippo 2 post lift i.a. Type 1211...

INA needle roller bearing needle bearing for upper spindle bearing Zippo lift i.a. type 1211

1x needle bearing (bearing ring) for upper spindle bearing 2 post...

inner ring, bearing ring for upper spindle bearing Zippo lift i.a. type 1211

bearing ring (upper bearing ring) for 2 post lift Zippo et al...

Sealing tape insulating tape 10m long Zippo 1211 lift

Sealing tape for 2 post lift Zippo et al Type 1211 - Car Lift -...

Roller guide roller for Zippo lift type 1250 H389

1x roller (bearing) for lateral stroke slide guide (four per side...

Sheet with pressed rubber strip to the spindle cover column for Zippo Lift i.a. type 1250 1590 LS (left side)

Sheet with pressed rubber strip to cover screw - column cover -...

upper spindle bearing, radial bearing, deep groove ball bearings for Zippo Lift Model 1211

1x radial bearings, deep groove ball bearings (open bearings) for...

upper spindle bearing, Axial deep groove ball bearings for Zippo Lift Model 1211

1x thrust bearing (three-piece bearing) for upper spindle bearing...

felt pack, lubricating mat for Zippo 1226 1226.1 1250 1250.1 1236 1506 1526 1521 1532 1532.1 Lift

1x lubricating mat for Zippo oil tank 2 post lift i.a. Type 1226...

Control box, control cabinet for Zippo Lift inter alia type 1130

1x control cabinet (housing) for Zippo 2 post lift i.a. Type...

rubber strip to the spindle cover column for Zippo Lift i.a. type 1250 1590 LS (right side)

Sheet with pressed rubber strip to cover screw - column cover -...

lifting nut, load nut, spindle nut for Zippo 1930 Lift

1x load nut (lift nut) for Zippo 2 post lift inter alia type 1930...

Zippo arm lock locking arm locking 1730 1731 1735

1x support arm completely for Zippo 1730 1731 1735 models (lock...

Original Wire rope for Zippo 2405 lifting platform

1x original cable wheel (with radial bearing + pin) for steel...

original cable pulley for Zippo 2405 Lifting Platform (for two steel ropes)

1x original cable pulley (with radial bearing) for two steel...

Lafert rectifier relays STD-1 Relay switches Rectifier Relay Zippo

1x Original Lafert Brake rectifier (Rectifier) Plastic housing...

original lifting nut for zippo 6 tons lift type 2150 2160 / 2.60-2M

1x Original load nut with groove for seawall for Zippo 2 column...

motor for Zippo 1735 Lift

1x drive (for spindle opposite side + operating side) control...

shift cable, control cable, safety cable for Zippo Lift 610170

1x Shifter cable (safety cable long) for Zippo 2 column stage and...

Bolt Shaft for control cable Steel cable Deflection pulley Wheel Roller Zippo 1526 1226.1 Lift

1x threaded shaft (pin 15.25.345) for deflection pulley 12mm...

Lubricating felt Lubricating mat Felt pack Felt oil tank Oil spill tank Zippo 1506 lift

1x Lubricating felt for oil tank Zippo type 1506 / 2 post lift -...

Oil tank cover Oil pan Oil reservoir Spindle lubrication Spindle Oiler Zippo lift

1x cover for oil catcher (oiler) for Zippo 2 post lift etc. for...

Spacer ring Plastic ring Guide roller Guide ring for Zippo Lift Type 1526 1511 1250 1532

1x spacer ring for Zippo - Def. Element Roller - steering segment...

Convex ring mounting ring mounting lifting nut Zippo 02.21.035

1x convex ring (lifting nut ring / lifting carriage) 1x piece per...

Convex ring mounting ring mounting support nut lifting nut Zippo type 1111 / 02.01.301

1x convex ring (lifting nut ring / lifting carriage) 1x piece per...

Pulley drive pulley double pulley Zippo lift 2002 2502

1x original pulley wheel (single pulley) for steel rope / Zippo...

Support arm pin bolt shaft pin locking pin Zippo 1730 1731 1735

1x support arm bolt (bolt 15.87.160) for lifts bracket for Zippo...

Safety Catch Roller for Zippo lift type 1526 1511 1250 1532

1x Roller for Zippo - Def. Element Roller - Reversing segment...

Safety Roller with bracket for Zippo lift type 1526 1511 1250 1532

1x Guide roller with bracket for Zippo - Def. Element Roller -...

Pin bolt Pin shaft for pulley Zippo lift 04.03.166

1x socket pin (bolt no. 63080403166) for pulley Zippo 4 post lift...

Carrier pin Bolt Shaft Pin Lock pin Zippo 02.40.050

1x support arm bolt (bolt 02.40.050) for lifts bracket for Zippo...

Pin bolt Pin shaft pin for cross member Zippo lift 04.98.203

1x socket pin (bolt no. 63080498203) for crossbeam Zippo 2 post...

Bearing pin Bolt Shaft pin for ball bearing Zippo lift 02.04.033

1x bearing bolt (bolt no. 63080204033) for roller Zippo post lift...

Bearing pin Socket pin Bolt Shaft pin for ball bearing Zippo lift 02.04.060

1x bearing bolt (bolt no. 63080204060) for roller Zippo post lift...

Turning pin Plug pin shaft pin for pulley Zippo lift 02.04.028

1x deflection bolt (bolt no. 63080204028) for swivel castor Zippo...

25mm roller side guide roller complete 02.15.073 ball bearing support roller Zippo type Z0 2/3, 1111

1x guide roller (bearing 02.15.073) for lateral lifting slide...

31mm roller side guide roller complete 02.04.220 ball bearing support roller Zippo 1111 / 1311

1x guide roller (bearing) for lateral lifting slide guide (four...

Lifting carriage receiving Convex ring lifting nut Zippo 02.21.262

1x mount for main nut or convex ring (suitable for lifting nut...

Spindle nut Lifting nut Load nut Zippo 1135 lift

1x load nut for Zippo 2 post lift type 1135 - Car lift - working...

Zippo bearing housing cover top bearing case without bearing 02.52.070

1x bearing housing without radial bearing & thrust bearing &...

Metal Sleeve Pipe Spacer Guide Roller Guide Ring Wheel Scooter for Zippo 1526 1511 1250 1532 lift

1x distance tube for Zippo - Def. Element Roller - deflection...

sprocket wheel for Zippo lift 1411 / 4 tons

1x sprocket wheel for spindle drive (metal) for Zippo 2 post lift...

Sprocket gear sprocket for spindle drive Zippo lift 15.07.040

1x sprocket - sprocket for drive (metal) for Zippo lift - Car...

43mm pressure roller roller guide roller ball bearing support roller Zippo lift 02.04.056

1x pressure roller (bearing) possibly stroke slide guide (please...

Locking bolt Shaft Pin Locking Support arm Zippo Lifting platform 02.40.050

1x support arm bolt (bolt no. ....) for lifts bracket for Zippo 2...

Spacer ring Plastic ring Guide roller Guide ring Wheel Scooter Zippo 1526 1511 1250 1532 Stage 19m

1x spacer ring for Zippo - Def. Element Roller - deflection...

Thrust Bearing Spindle Bearing Axial Deep Groove Ball Bearing FAG Zippo 6318NUET001

1x thrust bearing (three-part bearing) for upper spindle bearing...

Brake magnet without foot Motor brake for brake motor Binder Zippo lift 62.50.203

1x original brake magnet without brake disc for motor drive / 2...

Hawker AND Motor Electric Motor Drive Spindle Control Zippo Lift 16.56.212

1x Hawker drive (for spindle opposite side + operating side)...

ADAM DGF90 Motor Electric Motor Drive Spindle Control Zippo Lifting Platform 62.05.110

1x ABM drive (for spindle opposite side + operating side) Zippo...

Dietz DR80 motor electric motor drive spindle control Zippo 1250 lifting platform 62.05.105

1x drive (for spindle opposite side + operating side) Zippo 1250...

ATB AF90L Motor Electric Motor Drive Spindle Control Zippo Lifting Platform 62.10.140

1x ATB drive (for spindle opposite side + operating side) Zippo...

140mm Pressure roller Caster Guide roller Ball bearing Support roller Zippo 21.03.065

1x pressure roller (bearing) possibly lifting guide (please...

Control board PC board control 2 post lift Zippo Elektron 400568

PC board Zippo inter alia Type 400568 (T 4 5817.1 312 149)....

Control board PC board control 2 post lift Zippo 627840P606 409606

PC board Zippo inter alia Type 409 606 (627840P606)....

Control board PC board control 2 post lift Zippo 622070007504 RDR9508

PC board Zippo inter alia Type RDR 9508 2056270033...

Control Board PC Board Control Relay Lift Zippo Electron Universal BG1

PC board Zippo u.a. Type 4851865022 (4.3401-2)....

Zippo support arm lock locking swivel arm lock Armlock 21.30.012

1x support arm lock complete for Zippo 1730 1731 1735 models...

Brake disc Engine brake for brake magnet Binder Zippo lift 50.28.48

1x Original brake disc for motor drive / 2 post lift Zippo and...

Chain Tension for Zippo 1511 1211 lift

1x chain guide for Zippo 2 post lift Type 1511 1211 - Car lift -...

Spacer block, distance piece for lift pad Zippo lift Type 2030 2130 2135 2140 (50mm increase)

1x spacer for mounting plate 50mm raised quick connector system...

Cover for control Protective hood Cover pillar cover Zippo lift 15.08.245

1x control cabinet plastic cover for Zippo 2 post lift, etc. Type...

motor cover for Zippo lift 10.04.068

1x metal cover for Zippo 2 post lift inter alia Type - Car lift -...

Control box Control unit Control board Zippo 04.31.610

1x control cabinet (control box) with electrics for various Zippo...

Set of ropes cable control cable steel rope safety rope Zippo 2305 2205 2306 2405 lift

1x switching cable set (4x safety cable) for Zippo 4 column...

lift pad, rubber pad, rubber plate for Zippo lift 110x27mm

1x support plate for Zippo 2 post lift etc. Type ..... Car lift -...

Footswitch protection Sheet metal Angle plate Sashplate Plate Mounting Zippo 02.14.054

1x angle plate with two holes () for Zippo lift inter alia Type...

Locking Anti-rotation lock Locking cylinder Welding cylinder Zippo 15.07.156

1x recording cylinder with two holes (63081507156) for Zippo lift...

Retaining plate driver plate Driver Loading plate Ver Turning plate Zippo 03.24.381

1x drive plate with five holes (63080324381) for Zippo lift - Car...

Footswitch Footplate Angle Plate Plate Mount Holder switch Zippo K1629

1x Fußwippe with three retaining holes (02.14.054) for Zippo lift...

Timing pulley V-belt Pulley Pulley Screw Zippo lift type 1512 1526 1250 1532 1226

1x original toothed pulley large (belt pulley) for toothed belt /...

Timing pulley Timing belt V-belt pulley Zippo lift type 1226 1226.1 1250 1250.1 1501 1506 1512 1511 1521 1526 1531 1532 1532AM

1x original pulley for motor drive / 2 post lift Zippo inter alia...

Lock plate driver plate Driver Zippo 69.05.403

1x driver plate with two holes (650836905403) for Zippo lift -...

INA Roller Guide roller Ball bearing Bearing Support roller Zippo lift

1x roller (bearing) for lateral lifting slide guide (four pieces...

Convex ring mounting ring mounting support nut lifting nut Zippo type 1401

1x convex ring (lifting nut ring / lifting carriage) 1x piece per...

V-ribbed belt Ribbed belt Flat belt V-belt drive belt Zippo 2150 2160 lift

1x timing belt until 2010 (manufacturer Good Year) for 2 post...

Shifter cable Control cable Steel cable Safety cable Zippo Car lift 15.25.122

1x shift cable (safety cable long) for Zippo 2 pillar stage inter...

Signal Generator Lamp Switch Contact Relay Lamp Holder Control Zippo 1511 1521

1x lamp socket or contact switch (lamp holder) for control unit...

Safety Catch Roller Zippo lift type 1526 1511 1250 1532 2305 2205 2405

1x button complete (column 1 + 3) / pulley for rope holder...

Zippo transformer for fluorescent lamp 42 Volt 60.60.650

1x Zippo / Rohrlux transformer type STX - for work platform - car...

Main switch Control box control board Zippo 02.14.390

1x Control Cabinet (Control Box) with electrical system for...

INA holder mounting bearing ball bearing spindle bearing bottom bearing Zippo 1211

1x pillow block (ball bearing sealed on both sides) including...

Up Down Push for Zippo 1521 1511 lift

1x key plate for pressure switch (opening or lowering) for Zippo...

Rubber sleeve bearing ball bearing spindle bearing Zippo 1511 1520 1526 lift

1x rubber sleeve (15.01.395) for nut mounting 2 pillar lift Zippo...

Guide pin socket pin shaft pin straightening set for Zippo lift 15.04.105

1x guide pin (pin no. 63081504105) for Zippo column lift etc. Typ...

Safety Catch Roller for Zippo lift type 1526 1511 1250 1532

1x guide roller for Zippo - Def.Element Roller - deflection...

Motor ATMA 90 L 4 CSM electric motor drive spindle drive control page Zippo 2140

1x drive for Zippo 2 post lift (control page) including type 2030...

safety catch roller, deflection pulley for Zippo lift Type 1526 1511 1250 1532 2205 2305

1x Pulley for rope holder - Def element Roller -. Deflection...

lower INA spindle bearing ball bearing lowering bearing Zippo pillow block bearing foot bearing type 1211 ZO 2/3 1111 1001 ZO 2-3 ZO 2/3

1x ball bearing + (2x bearing shell) for the lower spindle...

INA track roller guide roller ball bearing support roller Zippo 6 tons

1x roller (ina bearing) for lateral lifting slide guide (four...

limit switch roller Zippo 1521 1271 lift

1x safety switch for Zippo 2 post lift etc. Type 1501 1506 1250...

Solenoid coil solenoid valve valve solenoid coil ZIPPO 64.42.103

1x solenoid valve (complete) for Zippo lift, etc. Type ..... -...

Guide holder locking flange bearing spindle bearing top bearing Zippo 03.24.277

1x flange (spindle guide) upper spindle bearing for 2 post lift...

Socket pin shaft control rope rope pulley deflection pulley guide pulley Zippo Consul

1x circlip shaft (bolt) for deflection roller 14mm inner diameter...

Socket pin shaft control rope rope pulley deflection pulley guide pulley Zippo Consul

1x circlip shaft (bolt) for deflection pulley 12mm inner diameter...

Socket pin shaft control rope rope pulley deflection pulley guide pulley Zippo Consul

1x circlip shaft (bolt) for deflection roller 16mm diameter -...

Guide holder locking flange bearing spindle bearing top bearing Zippo 60.01.090

1x malleable cast iron flange (spindle guide) upper spindle...

Radial insert ball bearing bearing ball bearing bearing spindle bearing Zippo 1211 ZO 2/3 1111 1001 ZO 2-3 ZO 2/3

1x flange bearing (ball bearing sealed on both sides) for upper...

Rod socket pin Shaft pin Zippo 1211 1201 1001 1101 1111 1301 1311 1312 ZO Z0

1x deflection bolt (bolt no.63080204028) for swivel castor Zippo...

INA roller guide roller ball bearing bearing support roller Zippo stage 04/21/056

1x pressure roller including needle bearing + DU bushing...

Hydraulic cylinder piston piston Zippo car lift scissor lift 04.24.127

1x piston for hydraulic ram i.a. Zippo scissor platform or...

Spacer ring plastic ring guide roller guide ring roller Zippo 24mm 02.24.03

1x spacer ring for Zippo - Def.Element Roller - deflection...

Pulley pulley pulley piston Zippo Consul lift

1x pulley (piston no.) For e.g. Zippo 4 post lift e.g. type...

Socket pin shaft control rope pulley pulley guide pulley Zippo Consul 16mm diameter

1x circlip shaft (bolt) for deflection roller 16mm diameter -...

Socket pin shaft control rope pulley pulley guide pulley Zippo Consul 14mm diameter

1x shaft (bolt) for deflection roller 14mm diameter - installed...

Valve unit control valve control slide KW-17-92 Zippo 25.02.087

1x original control valve KW-17-92 for lift e.g. Zippo type...

Bearing washer bearing ball bearing spindle bearing nut recording Zippo 1511 1250 1506

1x slide mount (15.01.395) for nut storage 2 post lift Zippo u.a....