Original spare parts for lift platforms / hydraulic ramps good quality

To use all the features on this website,
JavaScript must be enabled in your browser.

Our top products

cover band for MWH Consul lifting platform Type H 153 - H 241

Masking tape (plastic) for MWH / Consul 2 post lift type H 153 -...

EUR 65,45

incl. 19 % VAT excl. shipping costs

chain slider, chain slide bar for Hofmann lift Type GT 2.0 / 2.5 / 2.5 DB, GS 2.5 / 5.0, GE 2.5 / 3.0, GTE 2500 Duolift

1x chain slider, chain slide bar for Hofmann Duolift Typ GT 2.0 /...

EUR 16,01

incl. 19 % VAT excl. shipping costs

lift nut, load nut for ISTOBAL 42714 42712-00 Lift

1x lifting nut without cast housing (from year of construction...

EUR 111,99

incl. 19 % VAT excl. shipping costs

IBU deep groove ball thrust bearing (for lower spindle bearing on sprocket) for Hofmann Duolift Type GS GE GT GTE 2500

1x groove bearing (ball bearing sealed on both sides) for lower...

EUR 16,28

incl. 19 % VAT excl. shipping costs

lifting nut bar, rubber damper, sliding pad-quan for Zippo lift 1250 1250.1 1226 1226.1 1501 1506 1526 1532 1532AM 1511 1521

1x polyamide block hub nut strip (block / damper) sliding piece...

EUR 14,40

incl. 19 % VAT excl. shipping costs

guide block, sliding pad, sliding block for Nussbaum lift Type SL/SLE 2.25 2.30 2.32 2.40 / ATT Hymax S3200/S3000 S4000/S3500

1x slide guide For Nußbaum & ATT Hymax S3000, S3200, S3500, S4000...

EUR 11,85

incl. 19 % VAT excl. shipping costs

lift pad, rubber plate for Ever-Eternal lift (129mm x 15mm, reinforced version)

Rubber pad (reinforced design) for Ever-Eternal lifting platform...

EUR 13,33

incl. 19 % VAT excl. shipping costs

Rubber Lift Pad for Istobal Velyen Lift

1x mounting plate for 2 post lift inter alia Istobal / Velyen...

EUR 10,01

incl. 19 % VAT excl. shipping costs

receiving increasing + rubber recording for Zippo lift type H 387 / 2135 / 17 series (134mm x 17mm with steel insert)

1x receiving increasing + rubber recording for Zippo lift type H...

EUR 68,43

incl. 19 % VAT excl. shipping costs

Lift nut for Maha lift ECON 3 3.0 3.5 / from construction year December 2005 / 3 and 3.5 tons

Lift nut for Maha lift ECON 3 3.0 built after December 2005 / 3...

EUR 132,00

incl. 19 % VAT excl. shipping costs

sliding pad, sliding block, sliding element for RAV Ravaglioli lift type KPN/KPX/KPS versions (with holder)

1x sliding block with holder (sliding block + sliding shoe...

EUR 35,09

incl. 19 % VAT excl. shipping costs

deformation of sheet metal for lifting nut Zippo lift Type 1401 1411 1412 2-4 tons (Wear plate between lifting nut and safety nut nut)

Wear plate between lift nut and safety nut (Sägezahnmutter) Zippo...

EUR 57,10

incl. 19 % VAT excl. shipping costs

Keyway for pulley spindle drive Nussbaum SL SLE ATL SEL Lift

1x Parallel key for upper spindle drive nussbaum 2 post lift i.a....

EUR 8,99

incl. 19 % VAT excl. shipping costs

Control board PC board PCB board Mainboard Herrmann Eco Lift 2.35 / WÜRTH EL235 / WÜRTH EL235M

1x PC board + contactor for Hermann u.a. Type ECO Lift 2.35 /...

EUR 798,49

incl. 19 % VAT excl. shipping costs

Wheel brake cylinder Forklift VTA Takraf DFG 4002, 2002, 3002, 3202 / N-A etc.

1x Drum Brake Brake Cylinder (Cylinder + Cuffs + Venting Screw...

EUR 39,99

incl. 19 % VAT excl. shipping costs

Bernstein switch contact, regulator switch, Limit switch for Zippo lift type 1526 1226.1 1250 1590 (with tappet)

1x Bernstein limit switch, switch contact, button, safety switch,...

EUR 60,22

incl. 19 % VAT excl. shipping costs

lifting nut for Nussbaum lift Type SLE 2.25 SLE 2.30 SLE 2.32 and SL (TR 45x6)

1x load nut for nussbaum 2 post lift inter alia Type SLE 2.25,...

EUR 148,75

incl. 19 % VAT excl. shipping costs

Sliding disc sliding piece sliding block nussbaum Unilift UNI-Lift 3500 NT / Plus - 5000 NT / Plus - 5000 CLT / Plus - GSM / lower end is installed

1x sliding piece / sliding block (anti-skid protection for bottom...

EUR 55,58

incl. 19 % VAT excl. shipping costs

1 pair shock absorption protection, damper for lift nut or safety nut Zippo lift Type 2030 2130 2135 2140

1 pair of dampers (noise reduction) for lifting nut and safety...

EUR 22,61

incl. 19 % VAT excl. shipping costs

up/down switch MWH Consul 2.25 2.50 lift H049 H052 H105 H109 H142 H143 H146 H165 H169 H200 H238 H300 H365 (with cable and floor mounting)

1x replacement switch (reversing switch) with cable pull and...

EUR 190,88

incl. 19 % VAT excl. shipping costs

Oil tank screw guide sleeve oil pan bushing RAV KPN 324 312A 235 LIK 123A KPS

1x screw guide sleeve on oil pan installed in nut block (bushing)...

EUR 18,69

incl. 19 % VAT excl. shipping costs

Doorstop Door lock Cabin lock pin Yanmar SV 17, SV 17 EX, SV 15, SV 22 Mini excavator 172A5969490

1x door lock (door stop) for cabin door (key, pin, lock) for...

EUR 40,64

incl. 19 % VAT excl. shipping costs

Solenoid Solenoid for valve 2SV5 Autop 35295 Lift Underfloor 3009192

1x lowering valve coil (solenoid) for underfloor lift AUTOP No....

EUR 160,55

incl. 19 % VAT excl. shipping costs

lifting nut, load nut for Koni lift Type KO2M20, KN2, M20, 3532/T719

1x load nut for Koni 2 post lift - Car lift - work platform - car...

EUR 200,52

incl. 19 % VAT excl. shipping costs

Categories

0 Product 0 Product