Original spare parts for lift platforms / hydraulic ramps good quality

To use all the features on this website,
JavaScript must be enabled in your browser.

Our top products

lifting nut, load nut for Werther 255s / Autec 300S / Slift lifting platform (trapezoidal thread TR 40x6)

1x load nut (lift nut, load nut) for Werther 255s / Autec 300S /...

EUR 154,70

incl. 19 % VAT excl. shipping costs

up/down switch, reversing switch, control switch for Beissbarth Romeico Type 230.2 LC etc.

up/down switch, reversing switch, main switch, cam switch,...

EUR 174,41

incl. 19 % VAT excl. shipping costs

load nut, lift nut for ISTOBAL 42712-00, 42712-04, 42713-02, 42714-00 Lift 7121 / Part number is 007155

1x lifting nut without cast housing (from year of construction...

EUR 102,45

incl. 19 % VAT excl. shipping costs

Lifting nut for Ravaglioli RAV Lift KPN/KPX versions (65mm long, right-hand thread, one motor or two motor)

1x Lifting nut, load nut or lift nut for 2 post lift Ravaglioli...

EUR 97,58

incl. 19 % VAT excl. shipping costs

lift pad, rubber pad, rubber plate for Romeico lift type Atlantic / Nordmeer / Sahara (150x80x28mm)

1x lift pad, support plate, rubber pad, rubber plate for Romeico...

EUR 10,18

incl. 19 % VAT excl. shipping costs

Lafert rectifier relays STD-1 Relay switches Rectifier Relay Zippo

1x Original Lafert Brake rectifier (Rectifier) Plastic housing...

EUR 85,69

incl. 19 % VAT excl. shipping costs

attenuation disk, damping ring, vulkollan buffer for Hofmann Type Duolift 2500 GT/GTE BT/BTE, MSE 5000, MT/MTE 2500, STE 2500, ME 2.0

attenuation disk, damping ring, vulkollan buffer for Hofmann Type...

EUR 12,54

incl. 19 % VAT excl. shipping costs

V-ribbed belt (long), ribbed belt, flat belt, drive belt for Slift lift type CSO 2.25 / EL 2,5 GF / 3.0

1x Timing belts long (manufacturer Good year) for 2 post lift...

EUR 42,84

incl. 19 % VAT excl. shipping costs

deformation of sheet metal for lifting nut Zippo lift Type 1401 1411 1412 2-4 tons (Wear plate between lifting nut and safety nut nut)

Wear plate between lift nut and safety nut (Sägezahnmutter) Zippo...

EUR 57,10

incl. 19 % VAT excl. shipping costs

lifting nut or load nut for Stenhoj lift Maestro, Mascot, DS2 M Ø40x5mm thread lead

1x lifting nut or load nut for Stenhoj lift type DS2 M&E 301 /...

EUR 124,95

incl. 19 % VAT excl. shipping costs

Pneumatic cylinder valve for Nussbaum lift Type Unilift 3200+, Jumbo Lift old version (Lifts with hydraulics to 2.5 t capacity)

Pneumatic cylinder valve for Nussbaum scissor lift Type Unilift...

EUR 101,01

incl. 19 % VAT excl. shipping costs

1 pair sliding pads, sliding blocks, sliding elements for RAV Ravaglioli lift type KP/KPN/KPX/KPS versions

1 pair of sliding blocks at the front (sliding pad) for central...

EUR 14,28

incl. 19 % VAT excl. shipping costs

detent spring, check spring for Hofmann Duolift Type MTE 2500, MT 2500, MSE 5000, 2500 GT/GTE BT/BTE, GTE 2500

detent spring, check spring for Hofmann Duolift Type MTE 2500 MT...

EUR 33,96

incl. 19 % VAT excl. shipping costs

Oil tank screw guide sleeve oil pan bushing RAV KPN 324 312A 235 LIK 123A KPS

1x screw guide sleeve on oil pan installed in nut block (bushing)...

EUR 18,69

incl. 19 % VAT excl. shipping costs

Gasket set seal sealing ring cylinder Nußbaum gasket Bonded Seal 240 SPL DRM.50 Type SPL 3000/3500/4000

1x complete gasket set (for cylinders 2048mm long) for Nussbaum...

EUR 52,10

incl. 19 % VAT excl. shipping costs

lift pad, rubber plate for Zippo lift Type 1311 1313 (126mm x 22mm with steel insert + 1 center hole)

Rubber pad for Zippo 2 post lift - Platforms - Car Stage inter...

EUR 11,61

incl. 19 % VAT excl. shipping costs

original flat belt, v-belt for Nussbaum Smart Lift Type 2.30 SL, 2.32 SL, 2.32 SL MM, 2.40 SL MM (cable controlled)

Original flat belt (V-ribbed belts) / 2 post lift Nußbaum type...

EUR 30,35

incl. 19 % VAT excl. shipping costs

lift pad, rubber pad, rubber plate for Ravaglioli lift (150 mm x 25 mm without pins)

1x lift pad, rubber pad, rubber plate for Ravaglioli lift(150mm x...

EUR 9,70

incl. 19 % VAT excl. shipping costs

up/down switch reversing switch control switch for Hofmann lift Type MTF 3000

1x up/down switch, reversing switch, control switch for Hofmann...

EUR 243,08

incl. 19 % VAT excl. shipping costs

needle sleeve, needle roller bearing for Hofmann Duolift Type 2500 GT/GTE BT/BTE, MSE 5000, MT/MTE 2500, MTF 3000

1x needle sleeve, needle roller bearing for Hofmann Duolift Type...

EUR 26,85

incl. 19 % VAT excl. shipping costs

original safety nut for Zippo lift Type 1730 1731 1735

1x original safety nut (lift nut and safety nut are identical)...

EUR 113,05

incl. 19 % VAT excl. shipping costs

safety nut for autop and Stenhoj lifts type Maestro / Mascot / Miro / SBMW (trapezoidal thread Ø40x5, right-hand thread)

1x safety nut (right-hand thread) (new version from construction...

EUR 160,60

incl. 19 % VAT excl. shipping costs

Rubber Lift Pad for Istobal Velyen Lift

1x mounting plate for 2 post lift inter alia Istobal / Velyen...

EUR 10,01

incl. 19 % VAT excl. shipping costs

DU-bearing for lower spindle bearing Nußbaum Lift Type SL SLE 2.25 2.30 2.32 2.40

1x DU bearing bush (spindle bearing down) for lower spindle...

EUR 12,56

incl. 19 % VAT excl. shipping costs

Categories

0 Product 0 Product