Original spare parts for lift platforms / hydraulic ramps good quality

To use all the features on this website,
JavaScript must be enabled in your browser.

Our top products

Bernstein limit switch limit switch limit switch roller lever limit switch GC-SU1 FF

1x Bernstein safety switch GC-SU1 FF metal housing for, among...

EUR 58,99

incl. 19 % VAT excl. shipping costs

Control board, PC board for Slift Lift type CO 2.30 E3

1x PC-board for Slift inter alia Type CO 2.30 E3 - Lift - Car...

EUR 243,42

incl. 19 % VAT excl. shipping costs

Axial deep groove ball bearings for Stenhoj lift type Maestro 2 / Mascot 611 613 624 (for upper spindle bearing)

1x head bearing or axial ball bearing (ball thrust bearing) for...

EUR 22,49

incl. 19 % VAT excl. shipping costs

Throttle cable hand throttle cable Bowden cable control cable Kubota KX41-2S mini excavator RB20835130

1x throttle cable / hand throttle cable for Kubota mini excavator...

EUR 165,59

incl. 19 % VAT excl. shipping costs

up/down switch, reversing switch for MWH Consul lift Type H 500 H505 (for front mounting) / Zippo 1930 / Stenhoj 2.30 F / Stenhoj 2.30M - Trusters ELVT2300

up/down switch for front mounting MWH / Consul u.a. Typ H500 /...

EUR 171,75

incl. 19 % VAT excl. shipping costs

gearwheel, v-belt pulley for Zippo lift Type 1150 1226 1226.1 1250 1250.1 1501 1506 1511 1521 1526 1531 1532 1532 AM

gearwheel (steel) for motor drive / 2 post lift Zippo inter alia...

EUR 66,20

incl. 19 % VAT excl. shipping costs

Spacer block, distance piece for lift pad MWH/Consul Lift Type H-models (50mm increase by quick drop)

1x Spacer for receiving plate 50mm increase by quick drop...

EUR 34,51

incl. 19 % VAT excl. shipping costs

safety nut for Stenhoj lift DS2 M&E 301 Master (trapezoidal thread 40x5)

1x safety nut for Stenhoj lift type DS2 M&E 301 / DS2 Master /...

EUR 117,81

incl. 19 % VAT excl. shipping costs

chain sprocket wheel for MWH/Consul lift new design Type H 049 H 105 H 109 H 142 H 153

1x sprocket wheel for 2 post lift MWH/Consul new version type H...

EUR 56,59

incl. 19 % VAT excl. shipping costs

pin bolt locking pin locking pin pin Kubota KX41 KX41-2 6942166740

1x original bolt (pin) for bucket cylinder / connectors Kubota...

EUR 69,92

incl. 19 % VAT excl. shipping costs

lift nut, load nut, lifting nut for Stenhoj Autop lift type Mascot Maestro

1x original load nut completely new version until year of...

EUR 270,55

incl. 19 % VAT excl. shipping costs

Lifting nut for Nußbaum ATL / SEL (lifts with 1 spindle) to 5 tons capacity or 4 post lift (TR 43x7)

lifting nut (load nut) for Nussbaum Lift Type ATL, SEL (1...

EUR 207,20

incl. 19 % VAT excl. shipping costs

sliding pad with holder, sliding block, sliding element for Beissbarth Romeico R 224 until R 236 lift

sliding pad, sliding block, sliding element for 2 post lift...

EUR 29,75

incl. 19 % VAT excl. shipping costs

Right elbow pipe for the control cable control side 676317 Stenhoj Mascot Maestro lift

1x Right elbow pipe for the control cable - cable - safety rope...

EUR 68,76

incl. 19 % VAT excl. shipping costs

attachment, clutch, connecting for gear pump Nussbaum lift Type Unilift 3200+ (scissor lift) / SPL 3500 / T4 / 2.30 TTS / TOP-LIFT 4.40 / 4.30H / 2.30 DDK AS (underfloor platform)

1x coupling for gear pump (driver) for scissor lift Nussbaum type...

EUR 60,83

incl. 19 % VAT excl. shipping costs

original shift cable, control cable, steel cable for Zippo lift Type 1250, 1226, 1226.1 (12 series) (safety cable short)

1x Original shift cable (security cable short) for Zippo inter...

EUR 89,99

incl. 19 % VAT excl. shipping costs

Flange drive flange Kubota KX41 KX41-2 KX61-2 mini excavators 6831142620 6831142623

1x drive flange (flange, coupling) for Kubota mini excavators,...

EUR 303,17

incl. 19 % VAT excl. shipping costs

Starter 9 teeth left starter Takraf Frontstapler VTA Forklift DFG 1002 N-A

1x starter (left 9 teeth) in exchange 12 volt 1.3 Kw 1.8 PS TGL...

EUR 224,91

incl. 19 % VAT excl. shipping costs

carrier arm locking device for Consul lift Type from H105 H301 H300 H354 H265 363416 (Lock for 2 arms)

1 pair of MWH/Consul from H 105 and subsequent models support arm...

EUR 89,14

incl. 19 % VAT excl. shipping costs

Lifting nut for Beissbarth Romeico R 224 R 225 R 230 R 231 R 235 R 236 (75mm long) right-hand thread

Lifting nut, load nut or lift nut for 2 post lift Beissbarth...

EUR 105,91

incl. 19 % VAT excl. shipping costs

Connector, Rectifier, Plug for Nussbaum lift Type 2.35 TSK Top Lift Pro 2500

1x original 2-pin cable socket + rectifier + screw (plug) plastic...

EUR 13,69

incl. 19 % VAT excl. shipping costs

Bolt bushing set gasket connector pin set bracket boom Yanmar B15

1x bushing set & bolt set connecting piece dipper arm for Yanmar...

EUR 591,43

incl. 19 % VAT excl. shipping costs

Tank cap fuel filler cap Yanmar VIO 20-4 25-4 17248414140

1x tank cap for fuel tank / cap, tank for Yanmar mini excavators...

EUR 42,99

incl. 19 % VAT excl. shipping costs

upper spindle bearing for ISTOBAL 2 post lift type 42712-04 (Thrust ball bearings)

1x Axial deep groove ball bearings (Top Bearing) for ISTOBAL 2...

EUR 75,20

incl. 19 % VAT excl. shipping costs

Categories

0 Product 0 Product