Original spare parts for lift platforms / hydraulic ramps good quality

To use all the features on this website,
JavaScript must be enabled in your browser.

Our top products

Directional valve coil seat valve magnetic valve valve nußbaum Unilift UniLift 3500 NT

1x directional valve complete (2x installed control block item...

EUR 159,64

incl. 19 % VAT excl. shipping costs

Spacer spacer sleeve mounting elevation lift pad support plate Ravaglioli RAV

1x spacer for support plate to increase by 30mm. Quick-connect...

EUR 77,23

incl. 19 % VAT excl. shipping costs

Seal kit gasket sleeve gasket hydraulic cylinder Longus CL 2.40 F Autolift

1x seal kit (hydraulic cylinder 38mm rod diameter) for Longus 2...

EUR 83,11

incl. 19 % VAT excl. shipping costs

Nussbaum SLE control board SL control circuit board ATT main board ZPR 100 S

1x main board for various Nußbaum lifts (SL 2.30 2.32 2.35 2.40...

EUR 299,88

incl. 19 % VAT excl. shipping costs

toothed flat belt, drive belt, v-belt for zippo lift 1226 1226.1 1250 1506 1511 1521 1526 1531 1532

drive belt, poly-belt, toothed belt, flat belt, v-belt for 2 post...

EUR 47,00

incl. 19 % VAT excl. shipping costs

1x ball bearing (2x bearing shell) for lower spindle bearing Zippo lift 1226 1226.1 1250 1250.1 1506 1511 1521 1526 1532 1590 LS

1x ball bearing (2x bearing shell) for lower spindle bearing 1...

EUR 60,93

incl. 19 % VAT excl. shipping costs

control switch, reversing switch, up/down switch for Zippo lift Type 1130 2030 2130 2135 2140 etc. (with cable pull and bottom attachment)

up/down switch (reversing switch) with cable pull and bottom...

EUR 174,41

incl. 19 % VAT excl. shipping costs

original belt pulley for motor drive Zippo lift Type 1226 1226.1 1250 1250.1 1501 1506 1512 1511 1521 1526 1531 1532 1532AM

1x original aluminum pulley for upper motor drive / 2 post lift...

EUR 71,45

incl. 19 % VAT excl. shipping costs

original toothed belt pulley for zippo lift Type 1512 1526 1250 1532 1226

1x Original pulley large (belt pulley) for timing belt / Zippo 2...

EUR 259,28

incl. 19 % VAT excl. shipping costs

chain sprocket wheel for Zippo lift Type 1211 1111

chain sprocket wheel (plastic) for zippo lift Type 1211 1111....

EUR 84,00

incl. 19 % VAT excl. shipping costs

chain sprocket wheel for Zippo lift Type 1211 1111 (Plastic with socket)

chain sprocket wheel (plastic with socket) for zippo lift Type...

EUR 78,60

incl. 19 % VAT excl. shipping costs

maintenance Spray, lubricant, maintenance oil, oil for lifts of all kinds

Care and maintenance oil for 2 post lift - Scissor Lift - Scissor...

EUR 17,85

incl. 19 % VAT excl. shipping costs

original shift cable, control cable, steel cable for Zippo lift Type 1250, 1226, 1226.1 (12 series) (safety cable short)

1x Original shift cable (security cable short) for Zippo inter...

EUR 89,99

incl. 19 % VAT excl. shipping costs

shift cable, control cable for 2 post lift Zippo Type 1511

Shift cable (safety cable) for Zippo 2 post lift type inter alia...

EUR 66,41

incl. 19 % VAT excl. shipping costs

Bernstein limit switch for Zippo lift type 1250 1501 1506 1521 1590 (installed in the upper column drive side, upper limit switch)

Bernstein limit switch, button, safety switch, position switch...

EUR 37,27

incl. 19 % VAT excl. shipping costs

connection plate for lifting nut zippo lift Type 1001 1111 1211 1401 1411 / 2-4 tons (wear plate between lift nut and safety nut)

wear plate between lift nut and safety nut (Sägezahnmutter or TR)...

EUR 65,45

incl. 19 % VAT excl. shipping costs

Chain tensioner for zippo lift Type 1511 1211

1x Rubber attachment for chain tensioner (Chain Tension) for...

EUR 49,50

incl. 19 % VAT excl. shipping costs

chain sprocket wheel for MWH/Consul lift new design Type H 049 H 105 H 109 H 142 H 153

1x sprocket wheel for 2 post lift MWH/Consul new version type H...

EUR 56,59

incl. 19 % VAT excl. shipping costs

up/down switch, reversing switch for MWH Consul lift Type H 500 H505 (for front mounting) / Zippo 1930 / Stenhoj 2.30 F / Stenhoj 2.30M - Trusters ELVT2300

up/down switch for front mounting MWH / Consul u.a. Typ H500 /...

EUR 161,31

incl. 19 % VAT excl. shipping costs

cover band for MWH Consul lift Type H 300 old version

1x cover tape (up to serial number 226649) for MWH/Consul 2 post...

EUR 65,45

incl. 19 % VAT excl. shipping costs

carrier arm locking device for Consul lift Type from H105 H301 H300 H354 H265 363416 (Lock for 2 arms)

1 pair of MWH/Consul from H 105 and subsequent models support arm...

EUR 83,19

incl. 19 % VAT excl. shipping costs

Lifting nut for Nußbaum ATL / SEL (lifts with 1 spindle) to 5 tons capacity or 4 post lift (TR 43x7)

lifting nut (load nut) for Nussbaum Lift Type ATL, SEL (1...

EUR 207,20

incl. 19 % VAT excl. shipping costs

Safety nut for Nussbaum Lift type SL 2.25 2.30 2.32 / SLE 2.25 2.30 2.32 2.35 2.40 2.50 (TR 45x6)

1x Safety nut for nussbaum 2 post lift type SL 2.25 SL 2.30 SL...

EUR 142,68

incl. 19 % VAT excl. shipping costs

up/down switch, reversing switch, control switch for Nussbaum lift Type ATS 2.20 ATS 2.25 / BTS 2.20 BTS 2.25

1x control switch for Nußbaum 2 post lift type ATS 2.20 ATS 2.25...

EUR 129,11

incl. 19 % VAT excl. shipping costs

Categories

0 Product 0 Product