Original spare parts for lift platforms / hydraulic ramps good quality

To use all the features on this website,
JavaScript must be enabled in your browser.

Our top products

toothed flat belt, drive belt for Zippo lift 1250 1250.1 1226 1226.1 1501 1506 1511 1520 1521 1526 1531 1532

ribbed toothed belt, flat belt, v-belt for 2 post lift Zippo with...

EUR 175,00

incl. 19 % VAT excl. shipping costs

Lifting nut for Romeico H225 H226 H227 H230 H231 H 232 lift (trapezoidal thread 45x6)

Lifting nut, main nut, load nut or lift nut for 2 post lift...

EUR 124,95

incl. 19 % VAT excl. shipping costs

safety nut for Slift Slift Classic 2.25, Sopron CE300, IME Car lift 250/280/300-25/30/35 (+2M), 320/25-2M, Ebing-Excl.3, Longus, AFV-Sopron

1x safety nut for Slift Classic 2.25, Sopron CE300, IME Car lift...

EUR 150,99

incl. 19 % VAT excl. shipping costs

original potentiometer, poti, relais for Zippo lift Type 1730 1731 1735 1751 (900 cm cable length, plastic)

potentiometer, poti, potis (900 cm cable length, plastic) for...

EUR 220,15

incl. 19 % VAT excl. shipping costs

Solenoid coil solenoid valve seat valve Nußbaum Unilift scissor lift 2.35 TTS TTKAS

1x solenoid valve (220 V) for Nußbaum scissor lift including...

EUR 140,58

incl. 19 % VAT excl. shipping costs

lift nut, load nut for ISTOBAL 42714 42712-00 Lift

1x lifting nut without cast housing (from year of construction...

EUR 111,99

incl. 19 % VAT excl. shipping costs

safety nut for autop and Stenhoj lifts type Maestro / Mascot / Miro / SBMW (trapezoidal thread Ø40x5, right-hand thread)

1x Follower nut, locking nut - safety nut, new version, from year...

EUR 160,60

incl. 19 % VAT excl. shipping costs

Battery Switch Relay switch VTA Takraf Forklift DFG 3202 4002 6302 T174 IFA

1x Baukema battery switch or disconnector from the manufacturer...

EUR 54,40

incl. 19 % VAT excl. shipping costs

Rubber Lift Pad for Istobal Velyen Lift

1x mounting plate for 2 post lift inter alia Istobal / Velyen...

EUR 10,01

incl. 19 % VAT excl. shipping costs

sliding pad, sliding block, sliding element for RAV Ravaglioli lift type KPN/KPX/KPS versions (with holder)

1x sliding block with holder (sliding block + sliding shoe...

EUR 35,09

incl. 19 % VAT excl. shipping costs

receiving increasing + rubber recording for Zippo lift type H 387 / 2135 / 17 series (134mm x 17mm with steel insert)

1x receiving increasing + rubber recording for Zippo lift type H...

EUR 68,43

incl. 19 % VAT excl. shipping costs

bearing flange for RAV Ravaglioli lift type KPN/KPX/KPS versions (Bearing shell) R 224 - 236 / Rotary SPM40

1x bearing flange (for a bearing/tapered roller bearing) for...

EUR 68,39

incl. 19 % VAT excl. shipping costs

ribbed v-belt, flat belt, v-belt for Nussbaum lift type SE 250 / SL 2.40 / SL 2.50

1x ribbed v-belt, flat belt, v-belt for Nussbaum lift type SE 250...

EUR 38,28

incl. 19 % VAT excl. shipping costs

IBU deep groove ball thrust bearing (for lower spindle bearing on sprocket) for Hofmann Duolift Type GS GE GT GTE 2500

1x groove bearing (ball bearing sealed on both sides) for lower...

EUR 16,28

incl. 19 % VAT excl. shipping costs

Wheel brake cylinder Forklift VTA Takraf DFG 4002, 2002, 3002, 3202 / N-A etc.

1x Drum Brake Brake Cylinder (Cylinder + Cuffs + Venting Screw...

EUR 39,99

incl. 19 % VAT excl. shipping costs

needle bearing for Stenhoj lift type DS2 / Mascot / Maestro (for upper spindle bearing)

1x needle bearing for Stenhoj lift type DS2 / Mascot / Maestro...

EUR 26,85

incl. 19 % VAT excl. shipping costs

Lifting nut load nut for Hofmann Duolift Type MTE 3000 (new design)

1x Lifting nut, load nut or lift nut for 2 post lift Hofmann...

EUR 261,80

incl. 19 % VAT excl. shipping costs

Solenoid Solenoid for valve 2SV5 Autop 35295 Lift Underfloor 3009192

1x lowering valve coil (solenoid) for underfloor lift AUTOP No....

EUR 160,55

incl. 19 % VAT excl. shipping costs

lifting nut or safety nut for zippo lift Type 1150 1930 / DR 2000

Lifting nut or safety nut (plastic) for 2 post lift Zippo type...

EUR 160,60

incl. 19 % VAT excl. shipping costs

original v-belt pulley for Zippo lift (one motors) type 1501 1506 1226 1250 1511

1x original aluminum v-belt pulley, toothed pulley for drive belt...

EUR 72,90

incl. 19 % VAT excl. shipping costs

lifting nut, load nut for Koni lift Type KO2M20, KN2, M20, 3532/T719

1x load nut for Koni 2 post lift - Car lift - work platform - car...

EUR 200,52

incl. 19 % VAT excl. shipping costs

up/down switch, reversing switch, cam switch for Maha lift type Econ 2 - 3.0 / 3.5

1x up/down switch, reversing switch, cam switch, control switch...

EUR 117,97

incl. 19 % VAT excl. shipping costs

Tank cap fuel cap neck cap, tank Yanmar SV17 mini excavator 17248414140

1x tank cap for fuel tank / cap, tank for Yanmar mini excavators,...

EUR 38,50

incl. 19 % VAT excl. shipping costs

lifting nut for Stenhoj lift type DS2 600, DS2 633, DS2 840, DS2 850, DS2 630, A-S 630, DS2 635, A/S models wilth Ø40x6mm thread lead

11x load nut for Stenhoj A/S DK Barrit Denmark 2 post lift - car...

EUR 127,00

incl. 19 % VAT excl. shipping costs

Categories

0 Product 0 Product